- +1 954 484 9700 Talk to an expert
- 4180 NW 10 Avenue Ft. Lauderdale, FL-US
PRODUCTS
For nearly 70 years, Spraymation has designed and manufactured industrial spraying and paint coating systems, as well as spray applicators that deliver exactly the same result, drop after drop, shift after shift. From hot melt adhesives to medical-grade silicone, from paint laboratories to high-speed paper converting lines, our Electromatic™ applicators and complete liquid spray systems give engineers the consistency, control, and longevity that mass-market equipment simply cannot match.
Manufacturing engineers come to Spraymation when off-the-shelf spray equipment falls short — when overspray is driving up material costs, when inconsistent application is creating scrap and rework, when a unique fluid or production environment demands something custom, or when a critical line simply cannot afford downtime.
Our industrial spraying systems are designed and built under one roof in Fort Lauderdale, Florida, by the same team that has supported the world’s most demanding production environments since 1958. Every system is engineered around our patented Electromatic™ applicator head — a design with only one moving part, no dynamic seals, and a fully dripless, positive shut-off — proven across millions of cycles in Fortune 100 facilities and small custom production lines alike.
Spraymation’s industrial spraying systems are organized by the fluid you need to apply and the way it needs to be delivered. Each category combines our spray applicators with the right fluid handling, controls, and accessories to form a complete, turnkey solution.
Thermopulse™ hot melt systems and heated applicators for packaging, case sealing, palletizing, woodworking, product assembly, and high-speed converting. Heated to 450°F with RTD-controlled temperature accuracy and rapid-response actuation.
450°F MAX – RTD CONTROLLED – THERMOPULSE™
Liquid spray systems for cold adhesives, water-based glues, marking fluids, perfumes, and similar low-to-medium viscosity materials. Full-size, mid-size, and miniature applicators for everything from wide-web bonding to precision dot placement.
UP TO 6,000 CPS – FULL — MINI – WATER-BASED OK
Heated and unheated silicone spray applicators for medical device siliconization, including syringe barrels, plunger gaskets, needles, and catheters. Dispenses amounts as small as 0.25 mg with 1,000 cps unheated and 12,500 cps heated capability.
0.25 MG MIN – 12,500 CPS – CE · IEC
Compuspray™ automatic test panel machines for paint laboratories, coating formulators, and automotive R&D, including NRTL-certified, explosion-proof configurations and S3/S4 reciprocator and bell-atomizer systems.
NRTL CERTIFIED – COMPUSPRAY™ – BELL READY
Precision spray lubrication for embossing rollers, bakery release agents, food-grade pan oiling, non-contact medical lubrication, and articulated robotics. Designed for minimal waste, clean environments, and consistent film coverage.
NON-CONTACT – FOOD-GRADE OK – ROBOTICS READY
The Electromatic™ family that anchors every Spraymation industrial spraying system. Full-size, mid-size, miniature, airless, air-atomizing, handgun, multiple-outlet, and high-volume configurations for virtually any fluid and any environment.
1 MOVING PART – NO DYNAMIC SEALS – DRIPLESS
Pattern controllers, DC timers, ASME-approved pressure tanks, stainless steel high-pressure pumps, precision gear pumps, Teflon-lined hoses, and the full ecosystem of components that turn an applicator into a complete liquid spray system.
3480 CONTROLLER – ASME TANKS – 2,500 PSI PUMPS – PTFE – HOSES – SPRAY GUN PARTS
Why Engineers Choose Us
[01]
Our spray applicators are engineered for the kind of repeatability that eliminates overspray, scrap, and rework. Typical customers see ROI in 6 to 18 months from reduced material consumption alone.
[02]
Spraymation equipment installed 40 or more years ago is still running in production today. All wetted parts are stainless steel, with straight-line fluid flow, no trapped areas, and fluid sections that can be replaced as a unit without removing the gun from the line.
[03]
When a standard solution won’t work, we design, build, and test a one-of-a-kind system tailored to your fluid, your line speed, and your environment — whether that means a hazardous-location air-operated head at 5,000 PSI or a multi-line manifold for wide-web applications.
[04]
ISO 9001:2015 certified, with CE declarations, IEC connectors, Low Voltage Directive compliance, and NRTL-certified configurations available for environments that demand them.
[05]
Phone, email, and Zoom technical support; on-site service when needed; factory rebuild and gun exchange programs; an extensive inventory of spare parts and supplies; and recommended three-year inspection cycles for critical applications.
Spraymation industrial spraying systems are at work across paper and tissue converting, hot melt and cold adhesives, medical device manufacturing, paint and coatings laboratories, food and bakery production, packaging, and dozens of niche industrial applications.
Our equipment appears in virtually every paper towel and toilet paper roll produced by the world’s leading tissue manufacturers, in the R&D labs of top global paint companies, and on the production lines of medical device makers who require silicone dispensing precision measured in fractions of a milligram.
Don’t see your question? Our engineering team responds within one business day.
A spray applicator is the head that dispenses the fluid — Spraymation’s patented Electromatic™ head, for example. A complete industrial spraying system combines that applicator with everything needed to deliver fluid to it consistently: a pressure tank or pump, hoses, pattern controllers and timers, temperature controls for heated fluids, and any mounting or manifold hardware. We design and build both, so you can buy individual Electromatic™ applicators as replacement or expansion components, or turnkey systems engineered for your specific application.
Our liquid spray systems handle a wide range, including hot melt adhesives, cold adhesives, paint, coatings, heated wax, silicone, lubricants, marking fluids, perfumes, surfactants, food-grade release agents and oils, sealants, and many other industrial fluids. Viscosity ranges from water-thin materials up to 12,500 cps for heated silicone and into high-viscosity hot melts. If you have a specific fluid, our engineering team can confirm compatibility and recommend the right applicator configuration.
Yes — custom engineering is a core part of what we do. We routinely design one-of-a-kind systems for applications other manufacturers won’t take on, including hazardous-location explosion-proof configurations, wide-web multi-line manifolds, high-instantaneous-flow accumulator systems, European-compliant variants with IEC connectors, and applicators with extensions to reach confined areas. Send us your specifications and we’ll work with you to develop the solution.
Properly maintained Electromatic™ applicators and Spraymation industrial spraying systems regularly stay in production for decades — we have customers running equipment installed 40 or more years ago. Longevity comes from the patented one-moving-part design, all-stainless-steel wetted components, and the lack of dynamic seals that degrade over time. For critical applications such as medical silicone dispensing, we recommend an inspection and recertification every three years.
Yes. Spraymation is ISO 9001:2015 certified, with CE declarations and Low Voltage Directive compliance available for European installations and NRTL certification available on selected panel machine configurations.
Most customers see payback within 6 to 18 months, driven primarily by reduced material waste from eliminating overspray, lower scrap and rework rates from consistent application, reduced labor from automation, and the long service life that defers replacement capital expense. We’re happy to help you build a specific business case based on your current fluid consumption, line speed, and quality requirements.
Spraymation designs and manufactures all equipment at our facility at 4180 NW 10 Avenue, Fort Lauderdale, Florida. We ship industrial spraying systems and replacement parts to customers in over 66 countries worldwide, with phone and remote technical support available globally and on-site service when required.
Get Started
Whether you need a standard applicator or a fully custom liquid spray system, our team will help you specify the right configuration for your fluid, your line, and your goals. No salespeople, no scripts — just engineers with nearly seven decades of experience.
Or call us directly +1 954 484 9700